![]() For example, if two pattern sets print, and the best value for each set is 0 and 2, the average value would be 1. If so, check all pattern sets and average the adjustment value. ![]() Multiple pattern sets may print, depending on the paper width. After each alignment pattern is printed, view the LCD screen for instructions on selecting the best result in each pattern set.If you are printing on cut sheets, load additional sheets of paper after each pattern is printed. The printer prints the first adjustment pattern. Related tasksĪligning the Print Head Manually Using the Product Control PanelĪligning the Print Head Manually Using the Product Control Panel If you cannot run an automatic print head alignment on your paper or automatic alignment does not correct the problem, you can manually align the print head using the control panel on your product. If your printer still is not properly aligned, perform a manual head alignment. If the print head still seems misaligned, select a different alignment method and repeat the process. After the alignment is complete, check the results.Note: Do not open the front cover or turn off the printer during the alignment process. The sensor reads the adjustment pattern and automatically aligns the print head. Bi-D Alignment: aligns each color for bi-directional printing (takes 9 to 13 minutes to complete).Uni-D Alignment: aligns each color for uni-directional printing (takes 25 to 35 minutes to complete).Select Print Adjustments > Print Head Alignment.Select the option for the paper loaded in the printer.Note: If you are using commercially available paper, make sure you create the custom paper settings in advance. Make sure the correct paper type is selected.Note: Load paper that is at least 15.7 inches wide by 22 inches long (400 mm × 560 mm). Load roll paper or cut sheet paper in the printer.Note: You must manually align the print head when you are using any transparent or colored paper or on these paper types: Plain paper, Epson Enhanced Matte Posterboard. Make sure no direct sunlight enters the printer, or the alignment pattern may not be read correctly. Aligning the Print Head Automatically Using the Product Control Panel You can automatically align the print head using the control panel on your product.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |